Samsung GRAND Prime SM-G531H Dead Boot done by Factory Repair samsung g530h dead boot repair riff samsung grand prime dead boot repair samsung g531f dead boot repair riff
samsung g531h dead boot repair samsung g530h dead boot repair atf
g530h boot file samsung g530 dead boot repair
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G531F
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G531F_EMMC_P1J95K.srf
Voltage : 2.2V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC QN1SMB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 150100514E31534D42007113D23B8251
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QN1SMB
Product revision : 0.0
Product serial number : (hex) 7113D23B
Manufacturing date : 08/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : 00001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 638976
Number of sectors : 3072000
Device Manufacturer : samsung
Device Platform : sc8830
Build ID : LMY48B
Display Build ID : LMY48B.G531HDDU0AOI1
Release ID : 5.1.1
Device Model : SM-G531H
Device Name : grandprimeve3gxx
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandprimeve3gxx-user 5.1.1 LMY48B G531HDDU0AOI1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QN1SMB_31_08_2017_23_51_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.1; FW: 1.20.
P00: GPT (00000000, 00002000)
P01: SBOOT (00002000, 00001000)
P02: SBOOT2 (00003000, 00001000)
P03: wfixnv1 (00004000, 00000800)
P04: wfixnv2 (00004800, 00000800)
P05: tdfixnv1 (00005000, 00000800)
P06: tdfixnv2 (00005800, 00000800)
P07: WDSP (00006000, 00002000)
P08: MODEM (00008000, 00004000)
P09: MODEM2 (0000C000, 00004000)
P10: TDDSP (00010000, 00002000)
P11: FOTA_SIG (00012000, 00000800)
P12: wruntimenv1 (00012800, 00000800)
P13: wruntimenv2 (00013000, 00000800)
P14: tdruntimenv1 (00013800, 00000800)
P15: tdruntimenv2 (00014000, 00000800)
P16: PARAM (00014800, 00001000)
P17: efs (00015800, 0000A000)
P18: prodnv (0001F800, 00002800)
P19: RESERVED2 (00022000, 00001000)
P20: KERNEL (00023000, 00008000)
P21: RECOVERY (0002B000, 00008000)
P22: PERSISTENT (00033000, 00000800)
P23: persdata (00033800, 00004800)
P24: CACHE (00038000, 00064000)
P25: SYSTEM (0009C000, 002EE000)
P26: HIDDEN (0038A000, 0000F000)
P27: userdata (00399000, 00AF0000)
Selected pit file: C:/Users/Tapas/Desktop/G531HXXU0AOK2_G531HOJV0AOK1_XSG_Arabic_Rooted_v5.1.1/GRANDPRIMEVE3G_EUR_OPEN.pit
Open file "C:/Users/Tapas/Desktop/G531HXXU0AOK2_G531HOJV0AOK1_XSG_Arabic_Rooted_v5.1.1/G531HXXU0AOK2_G531HOJV0AOK1_G531HXXU0AOK2_HOME_Rooted.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOT... Done.
Switched to user area.
Writing partition SBOOT... Done.
Writing partition SBOOT2... Done.
Writing partition WDSP... Done.
Writing partition MODEM... Done.
Writing partition KERNEL... Done.
Writing partition RECOVERY... Done.
Writing partition CACHE... Done.
Writing partition SYSTEM... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.4.1; FW: 1.20.
Disconnected.
samsung g531h dead boot repair samsung g530h dead boot repair atf
g530h boot file samsung g530 dead boot repair
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G531F
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G531F_EMMC_P1J95K.srf
Voltage : 2.2V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC QN1SMB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 150100514E31534D42007113D23B8251
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QN1SMB
Product revision : 0.0
Product serial number : (hex) 7113D23B
Manufacturing date : 08/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : 00001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 638976
Number of sectors : 3072000
Device Manufacturer : samsung
Device Platform : sc8830
Build ID : LMY48B
Display Build ID : LMY48B.G531HDDU0AOI1
Release ID : 5.1.1
Device Model : SM-G531H
Device Name : grandprimeve3gxx
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandprimeve3gxx-user 5.1.1 LMY48B G531HDDU0AOI1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QN1SMB_31_08_2017_23_51_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.1; FW: 1.20.
P00: GPT (00000000, 00002000)
P01: SBOOT (00002000, 00001000)
P02: SBOOT2 (00003000, 00001000)
P03: wfixnv1 (00004000, 00000800)
P04: wfixnv2 (00004800, 00000800)
P05: tdfixnv1 (00005000, 00000800)
P06: tdfixnv2 (00005800, 00000800)
P07: WDSP (00006000, 00002000)
P08: MODEM (00008000, 00004000)
P09: MODEM2 (0000C000, 00004000)
P10: TDDSP (00010000, 00002000)
P11: FOTA_SIG (00012000, 00000800)
P12: wruntimenv1 (00012800, 00000800)
P13: wruntimenv2 (00013000, 00000800)
P14: tdruntimenv1 (00013800, 00000800)
P15: tdruntimenv2 (00014000, 00000800)
P16: PARAM (00014800, 00001000)
P17: efs (00015800, 0000A000)
P18: prodnv (0001F800, 00002800)
P19: RESERVED2 (00022000, 00001000)
P20: KERNEL (00023000, 00008000)
P21: RECOVERY (0002B000, 00008000)
P22: PERSISTENT (00033000, 00000800)
P23: persdata (00033800, 00004800)
P24: CACHE (00038000, 00064000)
P25: SYSTEM (0009C000, 002EE000)
P26: HIDDEN (0038A000, 0000F000)
P27: userdata (00399000, 00AF0000)
Selected pit file: C:/Users/Tapas/Desktop/G531HXXU0AOK2_G531HOJV0AOK1_XSG_Arabic_Rooted_v5.1.1/GRANDPRIMEVE3G_EUR_OPEN.pit
Open file "C:/Users/Tapas/Desktop/G531HXXU0AOK2_G531HOJV0AOK1_XSG_Arabic_Rooted_v5.1.1/G531HXXU0AOK2_G531HOJV0AOK1_G531HXXU0AOK2_HOME_Rooted.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOT... Done.
Switched to user area.
Writing partition SBOOT... Done.
Writing partition SBOOT2... Done.
Writing partition WDSP... Done.
Writing partition MODEM... Done.
Writing partition KERNEL... Done.
Writing partition RECOVERY... Done.
Writing partition CACHE... Done.
Writing partition SYSTEM... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.4.1; FW: 1.20.
Disconnected.
No comments:
Post a Comment