repair boot oppo r831k Z3X Easy Jtag
oppo 831k emmc repaire done
Z3X EasyJtag Software ver. 2.5.1.0
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 010070222EE63D88, ,FW Ver.: 01.58
CMD Pullup Level:2248 mV
CMD Active Level:2444 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 90014A4834473164040509A168A071D0
EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 07/2014 Rev.0x5
EMMC NAME: H4G1d , S/N: 161573024
EMMC NAME (HEX): 48344731642000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G1d _ 161573024_20170729_1308.extcsd
Found Data areas (firmware parts) count is: 4
Partition info successfully found
---------------------------------------------
P1 (PARTITION_P83) [0x900000 0xa00000] Size: 10.0MB
P2 (PARTITION_P83) [0x1300000 0xa00000] Size: 10.0MB
P3 (PARTITION_P83) [0x2d80000 0x600000] Size: 6.0MB
------ Android information ------
---------------------------------------------
Done.
No comments:
Post a Comment